Ethernet Mini Board
Our bestselling Ethernet Mini Board, allows you to easily connect your control system or microcontroller board to
a standard network. This board utilizes the new Microchip® ENC28J60 Stand-Alone Ethernet Controller IC
featuring a host of features to handle most of the network protocol requirements. The board connects directly to most microcontrollers
with a standard SPI interface with a transfer speed of up to 20MHz.
The Microchip® ENC28J60 is fully compatible with the IEEE 802.3 specification for network communication protocol. The IC
includes a number of packet filtering schemes to reduce the number of incoming packets and thus the overhead required in handling
network communications. An internal DMA is included for fast data throughput and hardware assisted checksum calculations. Data
cannot be automatically set to retransmit on checksum errors or data collision. The IC and data transmission is easily controlled through
a series of control registers onboard with an SPI interface for data transfer.
The Ethernet Mini Board is also fitted with a number of LED's for power indication and Network status, including
Link Okay and Data Activity. A standard RJ45 socket is fitted for easy network connection with standard male
headers provided on the base of the board, to plug directly into your control system or microcontroller board. The
board is suitable for use in both 5V and 3.3V powered systems, with low power consumption.
The Ethernet Mini Board is the perfect solution for adding a network connection to your control system
or microcontroller board. With an easy to use interface and an economical price, this board is ideal
for most embedded systems.
|
Total = $0.00 
Development Boards
